Mineral Filter

requires amics 5 1 0 or newer the released version of amics is {{version}} and can be found at docid\ se8jyhxszdqfpit7s1ja0 with instruction on the docid\ e1faehd1k20uedqhptzlx page manuals for previous versions of the software can be found at the docid\ d2biwe sybowhhdww0anz page to initiate a trigger based on material classification for a segment the mineral filter option can be used from the segment trigger settings tab to add a new filter setting click on the "plus" button in the upper left hand corner this will open a new context menu showing a list of all reference materials available in the current classification method to delete a selected filter condition, click on the red "cross" in the upper left hand corner the status column check box will either activate or deactivate the selected filter setting the min size setting will set the lower segment size required (in microns) to initiate the trigger the step size setting sets the grid size to try to create when a trigger is initiated the ac time will set the per point dwell time, which will adjust the total counts collected per point