2nd Channel Image
3 min
amics can read multiple video inputs from the acquisition device, with the current version of the software (version 3 3 1) allowing one additional video from the secondary channel this option will require bruker esprit to also have the secondary channel set correctly (contact your local bruker service and support if unsure) and can be set as a default measurement setting or set for each specimen to set 2nd channel image acquisition as the default condition for all new measurements move to the measure settings ribbon on the top tool bar on this ribbon select "both channel images" to set the 2nd channel image acquisition as default for all new measurements alternatively, users can set this option for individual measurements, if this additional image is not required for all specimens this option is available as one of the settings when setting up a measurement, and can be found in the extra settings option below is an example video showing how to set and unset the 2nd channel image as default for new measurements, as well as how to manually switch this option on and off for each measurement
